Home » Products » CX 411 through beam type Photo Sensor
CX 411 through beam type photo Electric Sensor sensing range 10meter NPN output red light sensor
Ø12 mm Ø0.472 in or more opaque object
(Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
Product Price | ₹3,000.00 Discounted Price | ||
Click to add this item to cart. |
SKU: | SKU00027 |
Product Description
CX 411 Through beam type photo Sensor sensing range 10m NPN output red light
As of September 28, 2022 (sensor)
Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
Item | Specifications |
---|---|
Product Number | CX-411 |
Part Number | CX-411 |
Regulatory compliance | EMC Directive, RoHS Directive |
Sensing range | 10 m 32.808 ft |
Sensing object | Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected. |
Hysteresis | – |
Repeatability(perpendicular to sensing axis) | 0.5 mm 0.020 in or less |
Supply voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
Current consumption | Emitter: 15 mA or less Receiver: 10 mA or less |
Output | NPN open-collector transistor – Maximum sink current: 100 mA – Applied voltage: 30 V DC or less (between output and 0 V) – Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) |
Output:Output operation | Switchable either Light-ON or Dark-ON |
Output:Short-circuit protection | Incorporated |
Response time | 1 ms or less |
Operation indicator | Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type) |
Stability indicator | Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type) |
Power indicator | Green LED(lights up when the power is ON) (incorporated on the emitter) |
Sensitivity adjuster | Continuously variable adjuster(incorporated on the receiver for thru-beam type) |
Automatic interference prevention function | Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m 16.404 ft) |
Protection | IP67 (IEC) |
Ambient temperature | – 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉ |
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face |
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Insulation resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each |
Shock resistance | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
Emitting element (modulated) | Red LED |
Emitting element (modulated):Peak emission wavelength | 680 nm 0.027 mil |
Material | Enclosure: PBT (polybutylene terephthalate) Lens: acrylic Indicator cover: acrylic |
Cable | 0.2 mm23-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long |
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver). |
Weight | Net weight: 95 g approx. Gross weight: 100 g approx. |
Accessory | – |